6061 Aluminum Alloy - Properties -
Property 6061-T4 6061-T6 Tensile Strength 241 MPa | 35000 psi 310 MPa | 45000 psi Yield Strength 145 MPa | 21000 psi 276 MPa | 40000 psi Modulus of Elasticity 68.9 GPa |
We are more than an aluminium alloy solution provider.
Do you need consumer aluminium alloy products or learn more info about aluminum alloy prices?
Property 6061-T4 6061-T6 Tensile Strength 241 MPa | 35000 psi 310 MPa | 45000 psi Yield Strength 145 MPa | 21000 psi 276 MPa | 40000 psi Modulus of Elasticity 68.9 GPa |
6061 aluminum physical properties are given in the following lists, including density, melting point, coefficient of thermal expansion, elastic modulus, thermal conductivity, specific heat capacity electrical conductivity, and electrical
Property 6061-T4 6061-T6 Tensile Strength 241 MPa | 35000 psi 310 MPa | 45000 psi Yield Strength 145 MPa | 21000 psi 276 MPa | 40000 psi Modulus of Elasticity 68.9 GPa | 10000 ksi 68.9 GPa | 10000 ksi Thermal Properties Property 6061-T4 6061-T6 Coefficient of Thermal Expansion 20.0 - 100 °C Temp 23.6 µm/m-°C | 13.1
The typical value for thermal conductivity for 6061-T6 at 25 °C (77 °F) is around 152 W/m K. The fatigue limit under cyclic load is 97 MPa (14 ksi) for 500,000,000 compley reversed cycles using a standard RR Moore test machine and specimen.
The theory of the thermal conduction of metals can be applied to study the effect of alloying elements and temperature on thermal conductivity and to design the composition of aluminum alloys based on the thermal conductivity
Laser shock processing of 6061-T6 aluminium alloy is carried out. Temperature and stress fields are simulated in line with the experimental
6061 Data Sheet Chemical Composition (in weight %) % Si Fe Cu Mn Mg Cr Zn Ti Others Each Al Each Total min 0.40 - 0.15 - 0..05 - - Remainder max 0..........15 Mechanical Properties (in weight %) Temper Units UTS (Min) 0.2%, YS % Elongation Typical Fatigue Strength Typical (minimum) (minimum)
EXTRUSION ALUMINIUM ALLOY EN AW- 6061. Amongst the alloys used for structural applications, alloy type EN AW 6061 finds an enormous range of use thanks to the medium-high resistances reached following hardening and tempering treatments (tempering and artificial
Abstract. Referring to extensive use of aluminum alloy (AA) 6061 in various types of industrial divisions, adequate knowledge of factors governing mability aspects of AA 6061 under different heat treatment conditions (T6, T4, and T651) is important. This subject has received limited attention in the
This paper describes a method of predicting the thermal conductivity of any aluminium alloy between the superconducting transition temperature (approximay 1 K) and room temperature, based on a measurement of the thermal conductivity or electrical resistivity at a single
Aluminium / Aluminum 6061 alloy is heat-treated at 533°C (990°F) for a sufficient period of time followed by quenching in water. The precipitation hardening process can be performed at 160°C (320°F) for 18 h followed by air
